1 technical data sheet 75 ohm mini smb plug right angle connector crimp/solder attachment for rg179, rg187 75 ohm mini smb plug right angle connector crimp/solder attachment for rg179, rg187 confguration connector mini smb plug connector interface type rg179,rg187 cable attachment method (shield/contact) crimp/solder body style right angle electrical specifcations impedance, ohms 75 mechanical specifcations size length, in [mm] 0.555 [14.1] width/dia., in [mm] 0.256 [7] height, in [mm] 0.628 [15.95] . weight, lbs [g] 0.006 [2.72] connector type mini smb plug contact material and plating beryllium copper , gold contact plating specifcation 30 in. minimum body material and plating brass, nickel body plating specifcation 100 in. minimum dielectric type t efon compliance certifcations (visit www.pasternack.com for current document) rohs compliant y es plotted and other data notes: v alues at 25 c, sea level 75 ohm mini smb plug right angle connector crimp/solder attachment for rg179, rg187 from pasternack enterprises has same day shipment for domestic and international orders. our rf, microwave and fber optic products maintain a 99% availability and are part of the broadest selection in the industry. click the following link (or enter part number in search on website) to obtain additional part information including price, inventory and certifcations: 75 ohm mini smb plug right angle connector crimp/solder attachment for rg179, rg187 PE4995 url: http://www.pasternack.com/mini-smb-plug-standard-rg179-rg187-connector-PE4995-p.aspx PE4995 PE4995 rev
? 2013 pasternack enterprises all rights reserved 2 PE4995 rev dwg title PE4995 notes: 1. unless otherwise specified all dimensions are nominal. 2. all specifications are subject to change without notice at any time. 3. dimensions are in inches [mm]. 4. fits mil-c-17 and equivalent cables. fscm no. 53919 cad file 061802 scale n/a size a 127 1. strip cable as shown & tin center conductor. slide ferrule over cable. 2. install cable into body of connector & soft solder center conductor in place. 3. crimp ferrule & press cap down. assembly procedures ferrule: .128" hex crimp tool crimp size required 75 ohm mini smb plug right angle connector crimp/ solder attachment for rg179, rg187 PE4995 cad drawing
|
